Driveway or patio
Concrete, pavers, or a pool deck that has gone gray. Tell us roughly how big and how badly soiled.
GEORGETOWN, TEXAS
A gray driveway
and a moldy north wall?
Tell us which surface and how big it is.
Describe your project for review. Contractor introductions are not available yet.
Project request
PROJECT DETAILSStep 1 of 2
Thanks — here's what you told us.
We'll review your project details and follow up about the next step. We won't share your contact information with a contractor without your permission.
WHAT ARE YOU DEALING WITH?Driveways & concretePatios & pool decksSiding & stuccoFences & decks
THE SURFACE YOU HAVE IN MIND
From one driveway
to the whole exterior.
You do not need to know the method. Tell us which surface, roughly how big, and which way it faces—shaded north and west walls grow the most mold—and mention soft surfaces like stucco or historic brick in your notes.
Siding or stucco
Walls with mold, mildew or algae, especially on shaded sides. Tell us the material and how many walls.
Fence, deck or other
A fence, deck, or something else that needs a wash. Tell us the material and the length or area.
YOUR PROPERTY
What needs
washing?
Driveway, patio, siding, or a moldy shaded wall. We're planning a local pressure-washing referral service and want to hear what Georgetown-area homeowners are dealing with.
Let us know where the property is, which surface, roughly how big it is, and when you would like it done.
Write it the way you'd explain it.
“A 2-car concrete driveway and the north stucco wall, about 600 square feet of each, plus the patio. Built in 1998.” That gives us something useful to work with.
We review each request and look for a contractor who serves the area and type of work you describe.
BEFORE YOU BOOK
What to know about pressure washing in Georgetown
Georgetown is humid-subtropical, with a historic core and a 55+ community that makes it a soft-wash and moisture-line town as much as a concrete one. These notes cover why the grime builds up, the surfaces it hits hardest, and what to check before you book.
Why the grime builds up here
Georgetown gets roughly 37 inches of rain a year in a humid-subtropical climate, with July and August heat spikes. That combination grows mold, mildew and algae on shaded—north- and west-facing—walls, roof lines and concrete year-round, not just in spring. The San Gabriel River and Lake Georgetown keep the local moisture line active, which is why algae shows up on lower walls and hardscape near the water. (Climate: Wikipedia.)
The surfaces Georgetown hits hardest
- Historic masonry. The Victorian and 1910s–30s homes around the square are stucco and brick. These need soft-wash, not high-pressure, so the finish is not damaged.
- Newer stucco and concrete. Sun City’s 55+ community and the growth-belt subdivisions are mostly newer stucco and concrete, where a standard pressure wash is usually fine.
- The moisture line. Lower walls and hardscape near the river and lake grow the most algae.
What to check before work starts
- Get a written quote. Cost varies a lot by surface, size and how badly soiled it is. Confirm a number and the scope before work starts.
- Match the method to the surface. Ask whether the crew uses soft-wash for stucco, siding and historic brick, and higher pressure only on hard concrete.
- Access and prep. Ask how they protect landscaping, electrical outlets and windows, and whether they rinse off any soft-wash solution.
Nearby pages
See pressure washing in Round Rock and Pflugerville. If trees near the house are part of the problem, see tree removal in Georgetown.
How requests work here
Local Project Guide is a new referral service run by Jon Staples. We read every request, and we do not share your contact details with a contractor without your permission. See the About page and the privacy notice.
Cost figures come from the linked sources, are estimates, and vary by site and contractor. Last checked September 2026. This is general information, not legal, engineering, or environmental advice.